Distributed Generation Application for Export less than 10kW

Applicant contact details

Name*

First Last

Phone*

Email*

ICP number*

Applicant's address*

Street Address Address Line 2 City ZIP / Postal Code

Install location address*

Same as previous

Street Address Address Line 2 City ZIP / Postal Code

Installer contact details

Company*

Company contact*

First Last

Phone*

Email*

Company address*

Street Address Address Line 2 City ZIP / Postal Code

Project description

Project description for Parts 1 and 1A applications.

Proposed install date*

Is this a new install, or are you upgrading from an existing install?*

New install

Existing install

What's the current generation capacity (kW)?*

Voltage required*

230V

400V

Number of phases required*

1-phase

2-phase

3-phase

Note: For single-phase inverters, these are limited to export 5kW each.

Generation type*

Solar

Wind

Hydro

Other

Make/model of generation type*

Total generation capacity (kW)*

Are you using an inverter?*

Yes

List all inverter makes/models*

Total potential export capacity of inverter/s (kW)*

Proposed export capacity (kW or kVA)*

Will the install utilise battery storage?*

Yes

Battery make/model*

Total battery capacity (Ah)*

Is the inverter on the Waipā Networks approved inverters list?*

Yes

Note: If the inverter is not on the approved list, please upload all relevant documentation that proves the inverter complies with AS/NZS 4777.1:2016 & AS/NZS 4777.2:2020

Additional Information

The combined loop impedance from your service main and the network LV cable back to the 11kV/415V Transformer will limit the amount of net export (generation less local consumption) from your system before causing a voltage issue to your system. The following measurements will help us with our assessment and are optional at this stage. Voltages should be measured between 11am and 3pm under no or light load conditions.

Red-white impedance - Ω

White-blue impedance - Ω

Blue-red impedance - Ω

Red-neutral impedance - Ω

White-neutral impedance - Ω

Blue-neutral impedance - Ω

Red-neutral voltage

White-neutral voltage

Blue-neutral voltage

Service conductor size (mm)

Service main length (m)

Additional details

Please upload a Singe line diagram and any other supporting information

Drop files here or

Max. file size: 128 MB.

Has the installed inverter been programmed with the pictured Volt-Watt response mode?*

Yes

Not applicable

Has the installed inverter been programmed with the pictured Volt-Var response mode?*

Yes

Not applicable

Does the install comply with the prescribed protection settings?*

Yes

For some large-scale applications, the protection settings will be subject to change in order to suit the installation requirements.

Application fees

Waipā Networks will send an invoice to the applicant after the application. Without payment, the application is considered incomplete and will not proceed.

Part 1A - Application with an Approved Inverter - $100 + GST
Additional Fees for Part1A are as follows:
Waipā Networks may elect to inspect the installation. This will incur - $60 + GST

Part 1 - Application without an Approved Inverter - $200 + GST
Additional Fees for Part1A are as follows:
Waipā Networks may elect to inspect the installation. This will incur - $60 + GST

Waipā Networks Account number is 03-0442-0252213-00

Application Type*

Less than 10kW - Part 1A (Approved Inverter)

Less than 10kW - Part 1 (Non-Approved Inverter)

Reference number you intend to use for payment*

Must be of the following format - (surname) DG. For example, for the applicant Joe Bloggs the reference will be "Bloggs DG."

Energy retailer proving the import/export metering at the install*

24HR FAULTS CALL 0800 800 769

Distributed Generation less than 10kW

Applicant contact details

Installer contact details

Project description

Additional Information

Additional details

Application fees

Declaration of information